1 / 5
paper holder for painting paper, etc. with tear-off edge — zdjęcie 1
1 / 5

paper holder for painting paper, etc. with tear-off edge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Paper holder for painting paper, etc. with tear-off edge, variable mountable for different paper rolls

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
149
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

Paper holder for painting paper, etc. with tear-off edge,
variable mountable for different paper rolls.

Maximum roller diameter 140-150 mm.

additionally needed:

1 x PVC empty tube or wooden rod, diameter 20 mm
1 x aluminum angle profile 25 mm x 25 mm x 2 mm

1. shorten the PVC pipe or wooden rod to the required length.
2. shorten the aluminum profile to the required length.
Grind the aluminum profile sharply from the outside (approx. 45°) on the lower side as a tear-off edge.

If necessary, glue the aluminum angle on the right and left side with some hot glue.

Printed with PETG, without support.