paper holder for painting paper, etc. with tear-off edge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Paper holder for painting paper, etc. with tear-off edge, variable mountable for different paper rolls
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Paper holder for painting paper, etc. with tear-off edge,
variable mountable for different paper rolls.
Maximum roller diameter 140-150 mm.
additionally needed:
1 x PVC empty tube or wooden rod, diameter 20 mm
1 x aluminum angle profile 25 mm x 25 mm x 2 mm
1. shorten the PVC pipe or wooden rod to the required length.
2. shorten the aluminum profile to the required length.
Grind the aluminum profile sharply from the outside (approx. 45°) on the lower side as a tear-off edge.
If necessary, glue the aluminum angle on the right and left side with some hot glue.
Printed with PETG, without support.