Pimax + Vive DAS Adapter TOP PEG with screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Never quite liked how the Peg attached on the original, always feared I would damage something when removing it or…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Never quite liked how the Peg attached on the original, always feared I would damage something when removing it or that it would just slip out at some point, so I made a Version of it where the peg is secured by two M4x15(or16) screws.
You need 2 M4 nuts and 2 M4x15/16 screws. Assemble without the headset first to ensure your screws aren't protruding. If you have trouble installing the nuts, just use a loinger screw to pull them into the sockets.
AS WITH ALL HEADSET MOUNTS, USE AT YOUR OWN RISK
EDIT: Added a second Peg which sits flush with the headset except for the screws. this one requires shorter screws(12mm)
Print Settings
Printer:
Bibo 2 Dual
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
50%
Filament:
Bibo PLAWhite
Category: Video Games