Pimax + Vive DAS Adapter TOP PEG with screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Never quite liked how the Peg attached on the original, always feared I would damage something when removing it or…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Never quite liked how the Peg attached on the original, always feared I would damage something when removing it or that it would just slip out at some point, so I made a Version of it where the peg is secured by two M4x15(or16) screws.
You need 2 M4 nuts and 2 M4x15/16 screws. Assemble without the headset first to ensure your screws aren't protruding. If you have trouble installing the nuts, just use a loinger screw to pull them into the sockets.
AS WITH ALL HEADSET MOUNTS, USE AT YOUR OWN RISK
EDIT: Added a second Peg which sits flush with the headset except for the screws. this one requires shorter screws(12mm)
Print Settings
Printer:
Bibo 2 Dual
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
50%
Filament:
Bibo PLAWhite
Category: Video Games