1 / 2
Little shelf for GB/GBC game cartridges — zdjęcie 1
1 / 2

Little shelf for GB/GBC game cartridges

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

GB and GBC game cartridges in their protective shells make a great display piece. So I made a little shelf for them.

Ocena
0 / 5
Polubienia
1
Pobrania
21
Wydruki
0
Wyświetlenia
180
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Gameboy and gameboy color game cartridges in their protective shells make a great display piece. So I built a little shelf a couple of years ago. This is the 3D printed version.

Printing

There is no need for any support. Choose the layer thickness to your liking. I went with "draft" 0.28mm. Since mine are printed black, the layers hardy show. 

Infill of 10% feels good.

Assembly

Print one of each left side, right side and shelves. Then get 6 self-tapping screws M2.5 x 6mm (flat, not pointy!) and screw them together. If you use pointy screws, go for M2.5 x 8mm and cut the points. 

Note To Title Image

The stand on the left is made from 3mm MDF. It did not take the black paint well. The boxes are just a thing I came up with and are not official.

The black PLA stand is the one on the right.

Tagi