1 / 7
D&D Height Help
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular height platforms for aerial compat/encounters in D&D games.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 711
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (86)Powiązane
Simple modular height platforms for aerial compat/encounters in D&D games. All elements are compatible with 1 inch (25 mm) grid.
This project contains:
- DnDHH-Rod_[Single/Double/Triple] - segment of height of 5 ft (1,5 m), 10 ft (3 m) and 15 ft (4,5 m) respectively;
- DnDHH-Rod_Single_B - special variant of segment of height of 5 ft (1,5 m) with a modified top that can hold this acrilic grid plate;
- DnDHH-Plate_3x3_[Bottom/Top] - platforms with a 3x3 inch grid with a connector slot in one corner (occupies 1 grid cell);
- DnDHH-Plate_4x4_[Bottom/Top]_A - platforms with a 4x4 inch grid with a connector slot in one corner (occupies 1 grid cell);
- DnDHH-Plate_4x4_[Bottom/Top]_B - platforms with a 4x4 inch grid with a connector slot in the middle of one side (occupies 2 grid cells).
Note: I've created this project from scratch by myself, however the general concept was took from Chad's project, therefore I want to give him credit for that.
Print settings:
- nozzle size: 0.4
- layer height: 0.2 will be sufficient
- wall line count: 3
- infill: 30-40%
- support: no