1 / 7
D&D Height Help
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular height platforms for aerial compat/encounters in D&D games.
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 125
- Makes
- 0
- Views
- 711
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution — Share Alike
Simple modular height platforms for aerial compat/encounters in D&D games. All elements are compatible with 1 inch (25 mm) grid.
This project contains:
- DnDHH-Rod_[Single/Double/Triple] - segment of height of 5 ft (1,5 m), 10 ft (3 m) and 15 ft (4,5 m) respectively;
- DnDHH-Rod_Single_B - special variant of segment of height of 5 ft (1,5 m) with a modified top that can hold this acrilic grid plate;
- DnDHH-Plate_3x3_[Bottom/Top] - platforms with a 3x3 inch grid with a connector slot in one corner (occupies 1 grid cell);
- DnDHH-Plate_4x4_[Bottom/Top]_A - platforms with a 4x4 inch grid with a connector slot in one corner (occupies 1 grid cell);
- DnDHH-Plate_4x4_[Bottom/Top]_B - platforms with a 4x4 inch grid with a connector slot in the middle of one side (occupies 2 grid cells).
Note: I've created this project from scratch by myself, however the general concept was took from Chad's project, therefore I want to give him credit for that.
Print settings:
- nozzle size: 0.4
- layer height: 0.2 will be sufficient
- wall line count: 3
- infill: 30-40%
- support: no