Wheels for Orthex SmartStore Classic 35 and Classic 70 storage box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement wheels for Orthex SmartStore Classic 35 and Classic 70 storage boxes
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
These are replacement wheels for Orthex SmartStore Classic 35 and Classic 70 wheeled storage boxes.
- EAN 7310543530173
- EAN 7332462058781
- EAN 7332462058767
- EAN 7310543541070
The original wheels are made in one piece and the axle can break easily when handling.
The wheel is available with or without profile and it's up to your personal preference. The original wheels don't have a profile.
The printable axle comes in two halves and needs to be superglued together. Alternatively, you can use the shaft of an M6 bolt. Cut it to 26mm length with a Dremel cut-off disc.
Printing
Print the parts in the original orientation. All STL files are pre-rotated.
Print Settings Wheel
- Material: PETG
- Layer height: 0.3mm
- Extrusion width: 0.4mm or 0.6mm
- Perimeters: 4
- Top / bottom solid layers: 5
- Infill: 10%
- Supports: No
Print Settings Axle
- Material: PETG
- Layer height: 0.1mm or 0.2mm
- Extrusion width: 0.4mm or 0.6mm
- Perimeters: 7
- Top / bottom solid layers: 5
- Infill: 0
- Supports: No