2020 feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are some feet I printed up out of TPU to place under the 2020 base of my printer.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 269
- Wydruki
- 4
- Wyświetlenia
- 1850
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
These are some feet I printed up out of TPU to place under the 2020 base of my printer.
They've done well to reduce vibration take some noise from the regular printing motion.
I just place them into the slot on all corners and near the middle (my printer has 2040 on the X)
Print instructions
Category: 3D Printer Parts Summary
These are some feet I printed up out of TPU to place under the 2020 base of my printer.
They've done well to reduce vibration take some noise from the regular printing motion.
I just place them into the slot on all corners and near the middle (my printer has 2040 on the X)
Print Settings
Printer: Tevo Tarantula
Rafts: No
Supports: No
Infill: 10-30
Notes:
Infill depends on weight of printer. I used 25% on a 3d hex infill, but could go lower. Alternating infill types are nice because they absorb a bit more.