Sockerbit holder for IKEA Myllra
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use a Sockerbit box as a diaper bin. Parametric (shelf thickness can be changed in .scad file).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
This fits the 19x26x15 cm Sockerbit box, and holds the lid when it's open. We found it works super well as a diaper bin.
Snug fit on the changing table, doesn't wobble at all. Can be made to fit other furniture (max. 33 mm, "wall" parameter in .scad file = thickness of shelf). Designed to fit on a Prusa MM2/3, and this is why the box is not riding lower. However, I found this position also gives better stability. No screws or glue needed. I printed mine with default parameters, except 10% gyroid infill, and stability is very good.