BROMPTON mount for IKEA RISATORP Basket

I like the looks of the IKEA RISATORP basket, and I also want to use it as a convenient shopping basket to go with my Brompton.

It's quite handy to go with both normal mode and shopping cart mode.

Thanks to the handles on the basket I can very easily carry it when it is not on the bike.

Remember to print this in a strong setting, I used 5 walls and 50% infill. Print upright so the locking section does not rely on layer adhesion strength.

you will need 4*M4x20mm screws, 8*M4 Washers, and 4*M4 locknuts to attach this mount to the basket.

***************************************

UPDATE 20230424

I made a tighter fit version 2 and also made two support bars to go on the inside of the basket, the mount is much more rigid this way.

also added pictures showing the support bar, one screw on each of the two bars directly mount to the basket mesh up top.

 With support bar you will need 4xM4*25mm screws and 2xM4*16mm screws and 6xM4 Locknuts,

 Without support bar just 4xM4*16mm screws and 4xM4 locknuts