BMW E46 CLUTCH STOP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple clutch stop for every E46 model. You just need an M10 hexagonal bolt, an M10 nut and a washer.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 1222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Simple clutch stop for every E46 model. You just need an M10 hexagonal bolt, an M10 nut (use it as a locknut) and a washer.
Behind the clutch pedal there is a small plastic cap, with a philips insert. Just unscrew it and you will find an M10 hole created by BMW for this exactly purpose.
The model has a 17 mm hexagonal cavity. Usually the bolt are 16.8 mm so this should be enough room for press it. If it's too loose (means that you have a nice calibration) there is a Ø4 mm hole for a M3 brass insert, with this you can secure the bolt with a tap screw. Or ask me and I'll upload a 16.8 mm version.
In my case I used a soldering iron and a loooot of patience to heat the bolt.