BMW E46 CLUTCH STOP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple clutch stop for every E46 model. You just need an M10 hexagonal bolt, an M10 nut and a washer.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 126
- Makes
- 0
- Views
- 1,222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Simple clutch stop for every E46 model. You just need an M10 hexagonal bolt, an M10 nut (use it as a locknut) and a washer.
Behind the clutch pedal there is a small plastic cap, with a philips insert. Just unscrew it and you will find an M10 hole created by BMW for this exactly purpose.
The model has a 17 mm hexagonal cavity. Usually the bolt are 16.8 mm so this should be enough room for press it. If it's too loose (means that you have a nice calibration) there is a Ø4 mm hole for a M3 brass insert, with this you can secure the bolt with a tap screw. Or ask me and I'll upload a 16.8 mm version.
In my case I used a soldering iron and a loooot of patience to heat the bolt.