Ender 3 Z-axis Limit Switch Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this cover/guard to help protect the exposed switch body and the printed circuit board that the z-limit
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 67
- Wydruki
- 2
- Wyświetlenia
- 533
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I designed this cover/guard to help protect the exposed switch body and the printed circuit board that the z-limit switch is mounted to. There is some play in the cutout for vertical adjustment of the switch.
Print Settings
Supports: None
Notes:
Print with no supports; I designed them in to the model.
Enable printing thin walls in order to have the thin radial support lines for the screw countersink support to print.
There is also a clip in version that does not require screws.
I upped the wall count to 5 to have no infill in the main sides, but fewer can definitely be used as high strength is not necessary.
Post-Printing
I designed this to use M4x30mm screws to go in the opposite side of the z-axis mount screw holes.
There is also a clip in version included as well that does not require screws.
How I Designed This
Used Fusion 360 for the modeling.