Alutech Box griphole insert - seal the box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted an airtight Alubox to get rid of Drybags for my filament. This insert glues on the inside of the Box to seal it.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 366
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Idea
As everyone i try to keep my Filaments as dry as possible for clean looking prints. Until today i used vacuum bags. One for each filament i have. This is always timeconsuming and anoying to pack or unpack the spool of filament bevore or after a printjob. For a long time i wanted to use my Alutech-Box as a filament storage and needed it to be airtight for that. So i decided to desing the inserts myself and glue them to the inside of the box to seal of the grip holes.
Printsettings
Nothing special is needed for the strucktural settings of the part. Just use your standard Slicersettings and PLA as material.
To print the Overhang properly i used the automatic Supports from PrusaSlicer2.6.0a5 and organic supports which worked out perfectly. See the 3mf-file for reference.
Assembly
As i designed the inserts i started using double sided tape to make sure everything fits. For a permanent bond i used glue for hard plastics which makes a bomb proof connection. The brand i am using is UHU. Let the glue cure for 24h and your gripholes are sealed and strong enough to lift the fully loaded box.
Happy Printing
Let me know if you would improve on something or if anything did not work out for your make. And of course let us see your make of this model ;-)