Cable Grommet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple, small cable grommet meant for a Ikea Platsa closet.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 282
- Wydruki
- 4
- Wyświetlenia
- 1462
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a cable grommet for my Ikea Platsa closet, where I have my printer, and all the other grommets I could find where either impossible to get to fit right or too large.
So I made my own.
It is made with a 30mm inside hole diameter, and requires a 38mm hole for it to fit into. The lid has a gap for a 8mm thick cable.
I've also included a tool for tightening them easier.
The lid is designed with snap-in connections, so it might seem tight, but that is to prevent it from accidentally coming loose over time.
Print suggestions
The model is made with tight clearances when printed with a .4mm nozzle and .2mm layer height.