1 / 7
LGX filament sensor V2 — zdjęcie 1
1 / 7

LGX filament sensor V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this is the V2 filament sensor from bond-tech tweaked to be printable on FDM printers.

Ocena
5 / 5
Polubienia
16
Pobrania
106
Wydruki
2
Wyświetlenia
718
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

in this version you don't need the steel lever instead you can use some parts from the original prusa extruder which are :1- small magnet 2-filament sensor 3- 3mm steel hex nut 4-7mm OD washer (can be printed if you can't sort it )4-push fit collar(from your E3D heat sink or the one included in LGX kit), i have included some picture for the parts.

IF YOU HAVE PRUSA ENCLOUSER YOU VAN USE THE PUSH FIT COLLAR AND FIT THE BODENTUBE ITS BODEN TUBE FRIENDLY 

i have printed it in 0.25 mm nozzle and modified the sensor housing to prevent it from breaking while fitting it . also i have made a washer(0.8 mm thickness & 6.8 MM OD) which will actuate the arm when the filament push it . all parts were printed in Prusament Galaxy Black PET-G(please dry it before printing ).

 

i recommend buying it from the link included its only 15usd if you are planning to buy some spare parts from bondtech , if you are like me you can print it .