1 / 7
LGX filament sensor V2 — image 1
1 / 7

LGX filament sensor V2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

this is the V2 filament sensor from bond-tech tweaked to be printable on FDM printers.

Rating
5 / 5
Likes
16
Downloads
106
Makes
2
Views
718
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

in this version you don't need the steel lever instead you can use some parts from the original prusa extruder which are :1- small magnet 2-filament sensor 3- 3mm steel hex nut 4-7mm OD washer (can be printed if you can't sort it )4-push fit collar(from your E3D heat sink or the one included in LGX kit), i have included some picture for the parts.

IF YOU HAVE PRUSA ENCLOUSER YOU VAN USE THE PUSH FIT COLLAR AND FIT THE BODENTUBE ITS BODEN TUBE FRIENDLY 

i have printed it in 0.25 mm nozzle and modified the sensor housing to prevent it from breaking while fitting it . also i have made a washer(0.8 mm thickness & 6.8 MM OD) which will actuate the arm when the filament push it . all parts were printed in Prusament Galaxy Black PET-G(please dry it before printing ).

 

i recommend buying it from the link included its only 15usd if you are planning to buy some spare parts from bondtech , if you are like me you can print it .