1 / 2
Ivar gap bridge — zdjęcie 1
1 / 2

Ivar gap bridge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bridge to cover the large gap between two cabinet elements on a large (50cm) Ivar

Ocena
0 / 5
Polubienia
46
Pobrania
88
Wydruki
0
Wyświetlenia
906
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

a 47cm bridge to fill the gap between two large ikea ivar cabinet elements. Print the element two times. 

 

Design idea

 I designed a flexible joint for two reasons: 

  1. to fit it into my prusa (sideways)
  2. to respect the different length you need depending on the amount of screws you use to hold the cabinets.

 

I created the joint with a 0.3mm tolerance in it to also respect DIY printers.

30cm Ivar version

IF there is demand for a short ivar version, please provide me with the required length in the comments. Or just cut the element in prusa slicer to the required size as a quick fix

Tagi