Ryobi Power Tool Holder (Wall Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Ryobi power tool holder with 3 holes for wall mounting remixed without logo.
- Ocena
- 4,8 / 5
- Polubienia
- 89
- Pobrania
- 966
- Wydruki
- 5
- Wyświetlenia
- 2707
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Guide:
Before printing, ensure your printer is properly calibrated.
Print Time: roughly 4 to 5 hours. (May vary depending on your printer).
Filament: PLA/PLA+ (My prints were done with xypolyer PLA+ Black 1.75mm)
Infill: At least 50% (anything lower is more prone to break).
Infill Pattern: Gyroid (recommended for strength in all directions).
If printing multiple, be sure to test the strength and fit of your first print before printing more.
Strength Test:
Mount the holder onto a surface, attach a tool to the holder and apply pressure vertically and horizontally while listening and feeling snapping/cracking.
Adjust Infill per cent accordingly.
Please be sure to post your makes to share with others!