Ryobi Power Tool Holder (Wall Mount)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Ryobi power tool holder with 3 holes for wall mounting remixed without logo.
- Rating
- 4.8 / 5
- Likes
- 89
- Downloads
- 966
- Makes
- 5
- Views
- 2,707
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Guide:
Before printing, ensure your printer is properly calibrated.
Print Time: roughly 4 to 5 hours. (May vary depending on your printer).
Filament: PLA/PLA+ (My prints were done with xypolyer PLA+ Black 1.75mm)
Infill: At least 50% (anything lower is more prone to break).
Infill Pattern: Gyroid (recommended for strength in all directions).
If printing multiple, be sure to test the strength and fit of your first print before printing more.
Strength Test:
Mount the holder onto a surface, attach a tool to the holder and apply pressure vertically and horizontally while listening and feeling snapping/cracking.
Adjust Infill per cent accordingly.
Please be sure to post your makes to share with others!