Adjustable Foot (for tables, chairs, etc.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adjustable foot for tables, chairs, or anywhere else you would need to adjust the height of something.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is an adjustable foot for tables, chairs, or anywhere else you would need to adjust the height of something. It uses a 17 mm Hex bolt and corresponding T-Nut or threaded insert for wood. Simply glue or epoxy the hex bolt into the foot and drill a hole to accept the t-nut and you're done.
For a stronger foot I would use up to 8 walls and higher infill. I used 8 walls with 50% infill and 100% infill at the top where the bolt sits to help it accommodate the weight of the project.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2mm
Infill:
30-50%
Filament: GST3D PLA+ Black
Notes:
For a stronger foot I would use up to 8 walls and higher infill. I used 8 walls with 50% infill and 100% infill at the top where the bolt sits to help it accommodate the weight of the project.
Category: Parts