Adjustable Foot (for tables, chairs, etc.)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adjustable foot for tables, chairs, or anywhere else you would need to adjust the height of something.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is an adjustable foot for tables, chairs, or anywhere else you would need to adjust the height of something. It uses a 17 mm Hex bolt and corresponding T-Nut or threaded insert for wood. Simply glue or epoxy the hex bolt into the foot and drill a hole to accept the t-nut and you're done.
For a stronger foot I would use up to 8 walls and higher infill. I used 8 walls with 50% infill and 100% infill at the top where the bolt sits to help it accommodate the weight of the project.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2mm
Infill:
30-50%
Filament: GST3D PLA+ Black
Notes:
For a stronger foot I would use up to 8 walls and higher infill. I used 8 walls with 50% infill and 100% infill at the top where the bolt sits to help it accommodate the weight of the project.
Category: Parts