HTC Vive Adjustable Lighthouse/Base-Station Wall Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modelled the design based on the ones that come with the Vive, useful for if you've lost yours or want to be able to…
- Ocena
- 4,833 / 5
- Polubienia
- 66
- Pobrania
- 667
- Wydruki
- 5
- Wyświetlenia
- 2657
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I modelled the design based on the ones that come with the Vive, useful for if you've lost yours or want to be able to mount in multiple locations. I made these to sell and to go with my quick-swap wall plates.
Supports have been modelled in, so all you need to do is snap them off with a pair of pliers once printed.
You will need a 2" long 1/4" hex bolt and nut for each mount, They are press fit but it can be quite tight, I use a mallet to make sure they're both snug. If the wingnut cracks when you press in the nut, try scaling the file up just a tiny bit to give more wiggle room.