HTC Vive Adjustable Lighthouse/Base-Station Wall Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modelled the design based on the ones that come with the Vive, useful for if you've lost yours or want to be able to…
- Rating
- 4.833 / 5
- Likes
- 66
- Downloads
- 667
- Makes
- 5
- Views
- 2,657
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I modelled the design based on the ones that come with the Vive, useful for if you've lost yours or want to be able to mount in multiple locations. I made these to sell and to go with my quick-swap wall plates.
Supports have been modelled in, so all you need to do is snap them off with a pair of pliers once printed.
You will need a 2" long 1/4" hex bolt and nut for each mount, They are press fit but it can be quite tight, I use a mallet to make sure they're both snug. If the wingnut cracks when you press in the nut, try scaling the file up just a tiny bit to give more wiggle room.