Easter Bunny
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easter Bunnies in Different Sizes with Fluffy Tail (Fuzzy Skin).
- Ocena
- 5 / 5
- Polubienia
- 465
- Pobrania
- 2245
- Wydruki
- 44
- Wyświetlenia
- 7880
- Oceny
- 35
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Included are decorative Easter bunnies with fluffy tails to place in various sizes:
- Size S: 100 mm height
- Size M: 125 mm height
- Size L: 150 mm height
The thickness of a figure is 17.5 mm (without tail).
Printing
The figures can be printed in one or two parts (see Files).
One-piece printing requires a filament change so that the body and tail have different colors:
- 0.0 - 17.5 mm: Color 1
- from 17.5 mm: Color 2
The filament/color change using PrusaSlicer is described here: https://help.prusa3d.com/article/color-change_1687
When printing in two parts, the body and tail are then glued together.
To get the look of a fluffy tail, you can try the "Fuzzy skin" option in PrusaSlicer, for example. This can be found under Print Settings ➝ Layers and perimeters ➝ Fuzzy skin (experimental). I use the following settings for this option:
Here you can see a before and after comparison:
Feel free to try other values as well :)
My Print Settings
- Printer: Prusa MINI (0.4 mm nozzle)
- Rafts: No
- Supports: No
- Resolution: 0.2 mm
- Infill: 15 %
- Filament brand: Prusament, Geeetech, BASICFIL
- Filament color: Galaxy Silver, White, Grey
- Filament material: PLA