Easter Bunny
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.09 – €0.12 net (excluding VAT)
For file: Easter_Bunny_S_100mm_Tail_Fuzzy_0.2mm_PLA_MINI_7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easter Bunnies in Different Sizes with Fluffy Tail (Fuzzy Skin).
- Rating
- 5 / 5
- Likes
- 465
- Downloads
- 2,245
- Makes
- 44
- Views
- 7,880
- Reviews
- 35
Updated at source:
Model information
- Source
- Printables
- Category
- Spring & Easter
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Included are decorative Easter bunnies with fluffy tails to place in various sizes:
- Size S: 100 mm height
- Size M: 125 mm height
- Size L: 150 mm height
The thickness of a figure is 17.5 mm (without tail).
Printing
The figures can be printed in one or two parts (see Files).
One-piece printing requires a filament change so that the body and tail have different colors:
- 0.0 - 17.5 mm: Color 1
- from 17.5 mm: Color 2
The filament/color change using PrusaSlicer is described here: https://help.prusa3d.com/article/color-change_1687
When printing in two parts, the body and tail are then glued together.
To get the look of a fluffy tail, you can try the "Fuzzy skin" option in PrusaSlicer, for example. This can be found under Print Settings ➝ Layers and perimeters ➝ Fuzzy skin (experimental). I use the following settings for this option:
Here you can see a before and after comparison:
Feel free to try other values as well :)
My Print Settings
- Printer: Prusa MINI (0.4 mm nozzle)
- Rafts: No
- Supports: No
- Resolution: 0.2 mm
- Infill: 15 %
- Filament brand: Prusament, Geeetech, BASICFIL
- Filament color: Galaxy Silver, White, Grey
- Filament material: PLA