Parametric Clothesline Hook For Towels And Swimsuits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Summer is around the corner. At the Route 3D6 household we hang our swimsuits and towels over a 1in rack to dry. This…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Summer is around the corner. At the Route 3D6 household we hang our swimsuits and towels over a 1in rack to dry. This clip helps the towels and swimwear from blowing away in the wind.
I have included a fusion file for users to change the bar diameter and width and thickness of the clip. Please edit only the three dimensions in the first sketch and the part will scale. The outer spring will remain twice the diameter of the inner clip for example. Supports are recommended as the print comes out functional yet ugly without. I have designed supports in the part itself and uploaded STLs with and without built in support. Users of the fusion file will need to roll the timeline forward to use the final extrusion of built in supports if these are desired, however the 5 thin supports provided may be too far apart on large clips.
Prints great in PLA+ with 10%infill
Category: Outdoor & Garden