SV06 Z probe mount (with insertless ADXL support)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a support for the SV06 Z probe mount that reduces the measurement error due to X axis twist
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 823
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This probe mount keeps the probe at the same Y level as the nozzle. This reduces the error due to the X axis twist by canceling the measured rotation around the X axis relative to the nozzle.
On my printer, there is still a rotation around the Y axis when the extruder travels on the X axis, so I still require an X axis twist compensation in software.
Do not forget to update the Z probe offset in your printer's configuration, the probe will be at X=37 and Y=0 relative to the nozzle.
There is a second version that allows mounting an ADXL345 accelerometer without insert, just with a pair of screws and nuts.