100mm Ladderline Seperator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seperators to build 100mm open wire feedline, AKA ladderline, using 14awg THHN wire
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I reworked a model for openwire seperators, originally done in tinkercad, using Fusion 360. The seperators are intended for use with 14awg THHN wire. Wire snaps into the recesses using a set of slip lock pliers. I used a dab of waterproof glue on top as insurance. Use a material that is weatherproof and UV resistant.
Please print and test a small number of seperators to see if they are appropriate for your application. The open wire feedline I built was done using an 18" spacing for seperators.
I included parts for a spacing jig. Print two of the T's (part 1) and one of the splints (part 2) then glue together.
I suggest printing the seperators with a high wall count and no infill. The design was intended to provide adequate strength while minimizing material use and print time.