100mm Ladderline Seperator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Seperators to build 100mm open wire feedline, AKA ladderline, using 14awg THHN wire
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I reworked a model for openwire seperators, originally done in tinkercad, using Fusion 360. The seperators are intended for use with 14awg THHN wire. Wire snaps into the recesses using a set of slip lock pliers. I used a dab of waterproof glue on top as insurance. Use a material that is weatherproof and UV resistant.
Please print and test a small number of seperators to see if they are appropriate for your application. The open wire feedline I built was done using an 18" spacing for seperators.
I included parts for a spacing jig. Print two of the T's (part 1) and one of the splints (part 2) then glue together.
I suggest printing the seperators with a high wall count and no infill. The design was intended to provide adequate strength while minimizing material use and print time.