Frosthaven Boss Proxy: Elder Ooze
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's my proxy for the Frosthaven boss, the Elder Ooze!
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 150
- Wydruki
- 3
- Wyświetlenia
- 530
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's my proxy model for the Elder Ooze from Frosthaven! The artwork for this guy is toweringly high, but since it's still a single-hex monster, I tried to capture that sense of scale by covering it with various skeletal bits. If you print it upright, it shouldn't need any supports, although it'll almost certainly require a 0.25 mm nozzle for some of those finer details!
As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!