AnkerMake M5 Mainboard Fan adapter (40mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for Anker M5 3d printer to use a 40mm fan on the mainboard
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 271
- Wydruki
- 7
- Wyświetlenia
- 1888
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The stock fan on the M5 is a 30mm (24v) fan.
Mine died after just a few days
I replaced it with a larger WINSINN 40mm (24v) ball bearing fan
WINSIN 40mm 24v Fan - Amazon
This is the same brand as the stock 30mm fan
WINSIN 30mm 24v Fan - Amazon
stl, 3mf and fusion 360 files provided
Also included are presliced gcode in PLA and PETG for a prusa i3
Installation
1. Unplug the printer from power
2. Remove the screws according to Ankers documentation
3. Remove existing fan
4. Slide brackets over the heatsink
5. Reuse the screws to mount the new fan
Related
Here are instructions to silence the powersupply
https://wiki.printed.boats/en/Modding/silence-power-supply
If you want Anker to silence the hotend fan while the printer is ilde, post on this issue https://github.com/ankermake/AnkerMake-Marlin/issues/3