1 / 1
Earrings organizer - Organizador de pendientes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizador de pendientes hecho la malla imprimiendo solamente el relleno.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
ESP
Archivo A y C: Impresión estándar de PLA.
Archivo B:
- En la configuración de la impresión se debe tener en cuenta que en las “carcasas horizontales”, las capas sólidas; tanto superior como inferior, deben tener valor 0.
- Ajustando el valor del Relleno/Infill, se puede ajustar el tamaño de la maya. En este caso, se utilizó un Relleno/Infill de 60%.
EN
File A and C: Standard PLA printing.
File B:
- In the print settings, it should be noted that in the "horizontal shells", the solid layers; both top and bottom, should have value 0.
- By adjusting the Fill/Infill value, the size of the mesh can be adjusted. In this case, a Fill/Infill of 60% was used.