1 / 1
Earrings organizer - Organizador de pendientes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Organizador de pendientes hecho la malla imprimiendo solamente el relleno.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 50
- Makes
- 0
- Views
- 862
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
ESP
Archivo A y C: Impresión estándar de PLA.
Archivo B:
- En la configuración de la impresión se debe tener en cuenta que en las “carcasas horizontales”, las capas sólidas; tanto superior como inferior, deben tener valor 0.
- Ajustando el valor del Relleno/Infill, se puede ajustar el tamaño de la maya. En este caso, se utilizó un Relleno/Infill de 60%.
EN
File A and C: Standard PLA printing.
File B:
- In the print settings, it should be noted that in the "horizontal shells", the solid layers; both top and bottom, should have value 0.
- By adjusting the Fill/Infill value, the size of the mesh can be adjusted. In this case, a Fill/Infill of 60% was used.