1 / 3
Sunset over Tatooine - 45 rpm Record Adapter - Star Wars Miniature Diorama — zdjęcie 1
1 / 3

Sunset over Tatooine - 45 rpm Record Adapter - Star Wars Miniature Diorama

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Luke Skywalker's home on Tatooine, Lars homestead, represented in all it's messy Star Wars glory on a miniature scale.

Ocena
0 / 5
Polubienia
35
Pobrania
63
Wydruki
0
Wyświetlenia
1051
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution

The Idea:

 

  • Miniature model of Luke's home on Tatooine
  • maximum possible detail for 0.4 mm Nozzle
  • including: small hill where he looks in the sunset, three barrels to the side, lots of junk around the hut, communication tower
  • hide an up to 15 mm long record player pin
     

 

 

 

 

Design Process:

  • for the suns I made some spheres as small as possible with a hole in the middle
  • the base has two holes as well, so you can feed a wire through and position the suns as you which


Overall dimensions:

Tatooine:

weight height diameter
7 g22 mm38 mm

Suns:

weight diameter
1 g8 mm


Print recommendations:

  • PLA
  • 0.4 mm Nozzle 0.12 mm layer height
  • 15% infill
  • I also changed the extrusion width to 0.4 mm to achieve a bit more detail
  • also set “Minimum perimeter width: 25%” and “Perimeter transition length: 0” shouldn't be necessary, but gave me a bit more detail

Post Processing:

  • I had to clean up some stringing, especially between the dome and the communications tower

Additional Parts:

  • piece of wire, about 3 cm if you want to add the suns

Assembly:

  • glue in the wire on one end
  • thread the suns on
  • glue in the other wire end 
  • position and glue the suns in place


Related Models:

 

 

LEGO plate - 45 rpm Record Adapter (open and closed version) - Lego compatible

Tagi