1 / 3
Sunset over Tatooine - 45 rpm Record Adapter - Star Wars Miniature Diorama — image 1
1 / 3

Sunset over Tatooine - 45 rpm Record Adapter - Star Wars Miniature Diorama

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.11 – €0.13 net (excluding VAT)

For file: sun.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.12 excluding VAT (range midpoint).

Weight reported by the author
1 g
Print time reported by the author
8.4 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Luke Skywalker's home on Tatooine, Lars homestead, represented in all it's messy Star Wars glory on a miniature scale.

Rating
0 / 5
Likes
35
Downloads
63
Makes
0
Views
1,052
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution

The Idea:

 

  • Miniature model of Luke's home on Tatooine
  • maximum possible detail for 0.4 mm Nozzle
  • including: small hill where he looks in the sunset, three barrels to the side, lots of junk around the hut, communication tower
  • hide an up to 15 mm long record player pin
     

 

 

 

 

Design Process:

  • for the suns I made some spheres as small as possible with a hole in the middle
  • the base has two holes as well, so you can feed a wire through and position the suns as you which


Overall dimensions:

Tatooine:

weight height diameter
7 g22 mm38 mm

Suns:

weight diameter
1 g8 mm


Print recommendations:

  • PLA
  • 0.4 mm Nozzle 0.12 mm layer height
  • 15% infill
  • I also changed the extrusion width to 0.4 mm to achieve a bit more detail
  • also set “Minimum perimeter width: 25%” and “Perimeter transition length: 0” shouldn't be necessary, but gave me a bit more detail

Post Processing:

  • I had to clean up some stringing, especially between the dome and the communications tower

Additional Parts:

  • piece of wire, about 3 cm if you want to add the suns

Assembly:

  • glue in the wire on one end
  • thread the suns on
  • glue in the other wire end 
  • position and glue the suns in place


Related Models:

 

 

LEGO plate - 45 rpm Record Adapter (open and closed version) - Lego compatible

Tags