FilaBench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is Revision 1 of the FilaBench: A quantitative filament-focused 3D printing benchmark.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 232
- Wydruki
- 1
- Wyświetlenia
- 1128
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
This is Revision 1 of the FilaBench: A quantitative filament-focused 3D printing benchmark.
The goal of this benchmark is to let you test your filaments, on your machine(s), with your settings and to be able to record performance numbers for later reference.
A secondary goal of this benchmark was to keep the print time and material used low. At quality 0.2 and 15% infill this print only takes ~90 minutes and ~10 grams of filament.
Full documentation for the print is available here: https://www.notion.so/jmakes3d/FilaBench-Documentation-290fdfbee3d14a9b957b231c846f4821
Print instructions
This file is designed to be printed without supports.