MINI 13: Boba Fett
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"You can run, but you'll only die tired." - Boba Fett
- Ocena
- 5 / 5
- Polubienia
- 585
- Pobrania
- 1778
- Wydruki
- 6
- Wyświetlenia
- 6926
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a character that I've been wanting to make for a while now and I'm happy I made him in a Mini rather than a full size Lucky 13.
- This design remixes most of the Mini 13 armor but you will still need to download mini13-armor-foot-2x.stl as well as the full set of MINI 13 frame parts
- Supports will be necessary for Helmet 1.stl, Helmet 2.stl, Waist.stl, Jetpack.stl and Chest.stl*
- You will need to print two of any piece with [x2] in the title.
In order to print Boba Fett the same way I did, you will need to do two filament swaps. The first is on Shin [x2].stl and the second is on Chest.stl. Oddly enough, both filament swaps came after layer 83 when printing with a height of 0.12 mm.
*If you choose to print the chest the same way I have, you will have to leave the orientation of Chest.stl the way it has been uploaded here and turn supports on 'everywhere' when you print. Alternatively, you could rotate Chest.stl in your slicer and print it like normal in a solid grey or green.
I printed all parts with a layer height of 0.12 mm and a speed of 50 mm/s