1 / 2
Replacement parts for IKEA Tacksam (1999-2010) — zdjęcie 1
1 / 2

Replacement parts for IKEA Tacksam (1999-2010)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made new brackets and endcaps for a discontinued Ikea curtain bar we've had for 15 years. Added name 18 december 2024

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
253
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Share Alike

We've had 2 of this nice, simple Ikea curtain bar for about 15 years and it's since been discontinued. It's very sturdy for the price, made of extruded aluminum, and it telescopes to fit the window. We've had them through 3 moves. So, of course, the plastic brackets and endcaps wore out from sun exposure and long use in the kids' rooms.

Given that I had to make new brackets entirely, I chose to make the new ones a smooth lower-profile curve and somewhat sturdier, with two mounting holes instead of one. The set screw hole is threaded. The end caps are rounded rather than duplicating the original squared profile for a safer end around kids and should fit very snugly on the bars.

I printed these at a fine detail setting due to the set screw holes and the snug fit the bar needs. Brackets can be printed with a 30% to 50% infill. I used tree supports for the joint piece and the brackets, and regular supports for the  two endcaps. End caps are printed solid for safety.

Added the copies I made of some of the original parts, for reference or folks who will be using these in a less stressful environment. I had made some and they are not as robust 3d printed as the original injection molded ones, so my teenagers broke them in less than a week. The redesigned versions have stood up to a few months of use now.

NOTE: I found the spare one I had, without its brackets, but with the original label, and it was called TACKSAM. Apparently this started being available circa 1999 (per the label) and was discontinued some time after 2008 or so when we bought ours. I do not have photos of the original brackets as they were very badly damaged, but have since found that they were used in this ikeahackers project.

Tagi