Infill Keychains (SEE INSTRUCTIONS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
This is a small and convenient keychain that you can print on your 3D printer. To ensure that the keychain has a the infill exposed, you need to modify the print settings to remove the top solid layer. Here are the steps to do that:
- Open your slicer software.
- Go to the "Print Settings" menu.
- Navigate to the "Layers and Perimeters" section.
- Find the "Solid Layers" option and set the "Top Layers" value to 0.
This will tell the printer to leave the top of the keychain hollow, revealing the infill pattern you've selected. If you want to change the infill pattern, follow these additional steps:
- Go to the "Print Settings" menu again.
- Navigate to the "Infill" section.
- Find the "Fill Pattern" option and select the pattern you prefer.
Once you've made these changes, you should be ready to print the keychain. If you find this information helpful, please consider leaving a like or a comment below. If you have any questions or doubts, feel free to ask!