Creality Sprite Extruder Pro Cable Guide Strain Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cable guide and strain relief for the Creality Sprite Extruder Pro ribbon cable
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 491
- Wydruki
- 2
- Wyświetlenia
- 3490
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
After adding the Creality Sprite Extruder Pro to my printer I needed something to keep the ribbon cable from twisting so much as the extruder moved through the print cycle.
I really liked the cable guide by Roland Deschain right here but it did not fit the setup on my Ender 3 Max as well as I would have liked.
A bit of remixing in Tinkercad and I have a solution!
I shortened the overall length and gave the guide a bit of an angle to aid with the strain relief. The guide slips in under the existing tabs and strain relief is provided by using a heavy-duty zip tie to hold the guide and cable together.
I printed it in PETG at 0.20mm. I was able to print it without supports in the pictured orientation. You may want to try it with supports on though.