Creality Sprite Extruder Pro Cable Guide Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cable guide and strain relief for the Creality Sprite Extruder Pro ribbon cable
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 491
- Makes
- 2
- Views
- 3,490
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
After adding the Creality Sprite Extruder Pro to my printer I needed something to keep the ribbon cable from twisting so much as the extruder moved through the print cycle.
I really liked the cable guide by Roland Deschain right here but it did not fit the setup on my Ender 3 Max as well as I would have liked.
A bit of remixing in Tinkercad and I have a solution!
I shortened the overall length and gave the guide a bit of an angle to aid with the strain relief. The guide slips in under the existing tabs and strain relief is provided by using a heavy-duty zip tie to hold the guide and cable together.
I printed it in PETG at 0.20mm. I was able to print it without supports in the pictured orientation. You may want to try it with supports on though.