Flat Axles For Filament Spool Winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cut 1mm off all axles for flat printing. 1 piece worm gear shaft.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 320
- Wydruki
- 2
- Wyświetlenia
- 2514
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple horizontal cuts on the axles for flat printing with no supports. I also created a 128mm solid axle to hold the worm gear to replace the 39mm and 88mm axles. The original design wobbled a bit when driving the 60 tooth filament guide gear. This is a solid shaft through both bearings. Simply superglue the worm gear in the right place. The worm gear is remodeled with a hole instead of hexagon to slip over the 128mm shaft. I printed it with a .05mm xy hole compensation to fit smoothly over the shaft. 3mf project file provided with all the axles and worm gear.
Update - added .stls for the models. It's a single stl for all the parts. You can split them into objects on the plate.