Flat Axles For Filament Spool Winder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cut 1mm off all axles for flat printing. 1 piece worm gear shaft.
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 320
- Makes
- 2
- Views
- 2,514
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Simple horizontal cuts on the axles for flat printing with no supports. I also created a 128mm solid axle to hold the worm gear to replace the 39mm and 88mm axles. The original design wobbled a bit when driving the 60 tooth filament guide gear. This is a solid shaft through both bearings. Simply superglue the worm gear in the right place. The worm gear is remodeled with a hole instead of hexagon to slip over the 128mm shaft. I printed it with a .05mm xy hole compensation to fit smoothly over the shaft. 3mf project file provided with all the axles and worm gear.
Update - added .stls for the models. It's a single stl for all the parts. You can split them into objects on the plate.