Derbi / Aprilia / Gilera Saddle mounting knobs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thumb screws/knobs to mount the saddle to a Derbi, Aprilia or Gilera moped.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 737
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Description
Knobs to easily mount the saddle of your Derbi, Aprilia or Gilera moped without the need of any tools! Two knobs needed for one moped.
Aditional required hardware
A hex M5x20mm bolt is needed per knob.
Backstory
I made this knob for my neighbor which I saw struggling with a screwdriver to mount his saddle, a tedious process. We then printed the thumb screws which are already available at Printables but these tend to be to big and the fuel cap lid won't close.
We then did our own measurements and designed these little knobs which made the mounting of the saddle a lot easier though still would fit under the cap. Specials thanks to Renzo ;).
Design was made in OnShape.
Print Settings
Printer Brand:
Biqu
Printer:
Biqu B1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30
Filament:
Black PLA
I printed in PLA, ABS or ASA is advised for better heat resistance