VW Bug Sprint Star Hub Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement hub cap for VW Bug Sprint Star steel wheels with VW logo.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 748
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
General
The hub cap is designed for a 75mm center hole of the Sprint Star steel wheels. Make sure that your hub has the correct dimensions.
The provided STEP file does not have two colors, this was done with the material change option in PrusaSlicer.
Be gentle with the tabs. They allow for a slight amount of bending, but try not to use excessive force when installing the caps. They won't fall off :)
Printing without Support
This model can be printed without support on a well tuned printer, if the perimeter count is increased on the ledge and the perimeters are printed from the inside out. A 0.1mm step was added just below the ledge so the amount of perimeters is not excessive.
The center part can be printed as overhang if you have a parts cooling fan.
Print Settings
- 0.1mm layer height
- 2 outer perimeters (except for the ledge)
- Material: PLA tested, others probably work as well