Bearing Bike 02A
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A print in place Akira inspired bike (Shotaro Kaneda's bike) with articulable steering, and utilizes two 625z bearing…
- Ocena
- 5 / 5
- Polubienia
- 109
- Pobrania
- 379
- Wydruki
- 6
- Wyświetlenia
- 2977
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
::UPDATE::
Tweaked the axles (wheel pins) - hopefully they will not break as easily and the wheels still go on without issue
A print in place Akira inspired bike (Shotaro Kaneda's bike) with articulable steering, and utilizes two 625z bearing plastic wheel pulleys
My particular pulleys were 10.4mm x 24mm
No support needed
It's a good calibration test object as it has some bridging, tight spacing, etc, and it takes less than 1 1/2 hours to print at 40mm/s.
Print instructions
Print flat side down.
No support needed
1 1/2 hours to print at 40mm/s and 0.2mm layer height.