1993 Nerf Sharpshooter Conversion for Elite Darts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a conversion kit for the 1993 Nerf Sharpshooter to allow it to use Elite darts.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Public Domain
This is a drop in replacement for the stock plunger on the 1993 Sharpshooter for one that supports a 17/32 brass barrel for use with Elite darts. It can easily be swapped in for the stock plunger without any permanent modifications to the blaster.
Also included is a replacement dart holder that holds 6 elite darts on the top of the blaster.
The only part required is a short length (about 60mm) of 17/32 brass tubing that should be glued inside the 3D printed barrel.
The plunger should be printed vertically in PLA with lots of perimeters (at least 6), 0.2mm resolution and 15% infill and no supports. The dart holder should be printed on it's side and needs supports.