1 / 2
Female part of door hinge for Liebherr KTPes 1750 (and others ?) refrigerators — zdjęcie 1
1 / 2

Female part of door hinge for Liebherr KTPes 1750 (and others ?) refrigerators

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

After a decade of use, the door of this refrigerator started to sag. It turned out that the female parts of the door…

Ocena
0 / 5
Polubienia
1
Pobrania
25
Wydruki
0
Wyświetlenia
169
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
BSD License

After a decade of use, the door of this refrigerator started to sag. It turned out that the female parts of the door hinges werein plastic, and the top one was worn out.

This is a 3D printed replacement. On the picture, the original is the grey part on the left, the replacement the black one on the right.

Print Settings

Rafts:

Doesn't Matter

Supports:

No

Notes:

Print vertically.

Printing in grey should make a part very similar to the original.

Post-Printing

Depending on your printer, they may be a slight bulge near the top, that you may need to sand for the part to fit.

Category: Replacement Parts

Tagi